Mascar Multiwrap – A new press Baloat with a breeder

Presses of cylindrical bales Chewas Diavel, launched at Agritechnica 2017 and the new MultiwrapThey were created following the constant commitment of the Italian company to identify flexible solutions that allow agriculture professionals to transform any type of material into the fur, from any type of soil, always guaranteeing a high quality of work.

Quick, compact and reliable, Multiwrap It is a print designed to meet the needs of those who work with a wide variety of collected material, paying particular attention to high quality feed.

The main advantages:

• Uniform bales
• High productivity
• High speed of lifting the material from the furrow
• Easy in operation
• Low costs

There are two models of bales for fixed chamber mascar multiwrap.

To both the dimensions of the vote is of 130 x 120 cmThe power supply requirement from the tractor is 120 HP. The differences are for the cutting system: Cut Multiwrap 130 has 15 knives and Multiwrap 130 cut.25 It has 25 knives.

The lifting of the material from the wake, its pressure, that is, the formation of the bales and their binding are operations that the equipment carries out in a single step. At the same time, it is possible to avoid the possible contamination of the power supply, by contact with the ground.

The installment system with the double satellite arm completes the cycle above, distributing a sheet uniformly and quickly throughout the surface, in order to obtain a perfectly sealed product.

Why is it recommended to influence bales?

Since, by drying, the proteins present in the plant are reduced, the feed for forage maintain a higher protein content and also have a better flavor and are easier to digest. In addition, a constant nutritional intake and the risk of deterioration relating to climatic conditions is guaranteed throughout the year. On the other hand, a highly manipulated bale is less manipulated, thus reducing the risk of bacterial contamination and loss of leaves, when working with delicate material collected. Everything above means better nourished animals, which will be able to guarantee a high quality final product.

Not to mention the fact that the choice of a press + angry equipment allows you to reduce the time spent on the field and the number of people involved in carrying out all these tasks.

The component elements of the press a very high resistance.

It is also designed for slope works, the Press + Angry system is a perfect combination that allows you to use less resources and increase productivity for now.

Technical characteristics of the press, Here.

The cutting system

The pick-up wheels are fixed or folding (optional) and are equipped with a rapid adjustment system in height. This allows the perfect consequence of the furrow.

The rotating power supply consists of «stars with three peaks» arranged helical. This allows a constant offer in any condition, avoiding absorption peaks.

The balloon room

The rotation of the ball is supplied by 18 rollers, 17 of which have a new surface with profiles that guarantee good rotation and good stability, and the first base from the base consists of 8 welded plates that force the rapid start of the rot.

All rollers and frames are designed and optimized according to Fea (finished analysis element) to reach the maximum resistance level and at the same time a low weight.

The operating system

Multiwrap It is provided with one of the most intuitive electronic interfaces available on the market, the terminal M 700, responsible for both the printing and the monitoring of the riot. This is one of the strengths of the machine, created above all to combine high performance and comfort in use.

Some functions

Revision programming: Reminder

Automatic cleaning of the knives: set after how many bales formed the automatic cleaning of the boxes with knives occur.

Automatic (optional): set the duration in minutes between each tile.

Anti -blocco system with automatic return: in case of locking /clogging, a simple button activates the base and an automatic function closes it when the rotor starts again to rotate again.

From the lifting of the material collected to the vote it is only one click: a completely automatic cycle!

A single supervision monitor both the printing operations and the breeding device.

The connection system

The print connection system can have two network rollers, one in work and a backup. Both rollers have a support rod, without the need for an internal support plate. The place of the place is part of the standard equipment. Optionally, you can choose the bales of the bales.

The angelier

The geometry and position of the sheet lengthening device were designed to minimize the size of the machine. In addition, the way of lengthening the sheet has been improved to obtain excellent coverage of the ball and to reduce losses.

If you wish, you can work with a single foil cartridge.