How to keep your outdoor swimming pool correctly?

For families who have a swimming pool, it constitutes a source of well -being, because it offers its home owners. However, due to the lack of adapted knowledge or equipment, a swimming pool can suffer from a lack of maintenance.

Numerous external disorders, such as pollution due to dust and falling leaves, without forgetting users' hair, as well as bacteria, can, in fact, influence the quality and purity of the water in the pelvis. In this case, instead of offering pleasure, a swimming pool can become a real constraint.

To avoid this bad situation, It is advisable that any owner paid more attention to their swimming pool. Great attention will facilitate maintenance. This will guarantee the quality of the water, as well as the maximum conservation of the installation status.

Why keep water from your swimming pool and clean it?

Many signs show that a swimming pool is poorly maintained:

• The coloring of the water which, instead of being clear and clear, becomes green;
• The appearance of a floating line;
• An smell of chlorine emanates from the swimming pool;
• Water causes skin irritation.

Therefore, keeping the swimming pool regularly is a mandatory task because quality bathroom water is a guarantee for users' health.

All types of outdoor swimming pools (inflatable, tubular, buried or above ground) are influenced by this regular and periodic maintenance.

As for cleaning, this avoids the premature wear of coatings, such as lining, cement or tiles. Periodic cleaning also allows you to preserve water from any external pollution and therefore offers the advantage of quality clear water.

How to keep your swimming pool outdoors?

In general, almost every four years for a swimming pool has been changed. To have an always clean and pleasant swimming pool to use, regular cleaning is needed. Above all, these interviews allow you to preserve the fairly substantial budget represented by the cubic meters of water that fill the swimming pool.

To maintain this precious water in good condition as long as possible, the secret is to have some penalty and regularity.

• Keep your swimming pool daily

To maintain a clean and algae -free swimming pool, simply make small very simple gestures, How to collect suicidal insects and dead leaves floating on the surface of the water using a landing network. It is also possible to cover the swimming pool with a tarpaulin when it is not used.

The procedure is also recommended regularly to verify the correct functioning of the filtration system.

Filtration plays a very important role in this interview because it allows water to regenerate. Therefore, it is considered the lung of the swimming pool. The operation of the system is very simple. It is a closed circuit programmed by a clock.

The swimming pool is sucked into the pump through the skimmer. It is redirected to the pelvis, after cleaning through the filter and exhaust nozzles. For filtration, the largest impurities are purified on the surface. However, you should know that filtration is ineffective against microscopic parasites, such as bacteria and mushrooms. This is the reason why this task must be completed by a water treatment.

Good filtration should be performed for periods from 8 to 12 hours continuously. During the summer, the high temperatures cause the maximum use of the swimming pool. Therefore, it is recommended to increase the filtration time and do it during the day.

In fact, it is during this period that the pollution peak is the highest. To find the exact time necessary for filtration, it is necessary to divide the external temperature of two. For example, if he is 30 years old^ORC outside, the requested filtration time will be 15 hours.

• Ensure weekly swimming pool maintenance

Cleaning at least once a week, using a vacuum cleaner or robotic broom, eliminates dirt at the bottom of the pelvis. For a better result, we recommend the use of a swimming pool detergent, for example.

This cleaning must also concern the floating line. For this, it is necessary to use a magical sponge or a special gel.

Filtration equipment, such as skimmer, pumps and filters, must also be cleaned because they can dress very quickly.

Even the water level, its pH and its chlorine rate should be controlled. The measuring the pH is performed using strips specially designed for this purpose. You should know that the effectiveness of other products for water treatment depends on the pH, whose ideal value is between 7.2 and 7.6.

As for chlorine, it is already mentioned a little higher than this element, in addition to the irritation of the skin and eyes, it emits a strong smell when its rate is insufficient in the water of the swimming pool. To increase this rate, simply perform a shock chloration and then read the water pH.

Bromis, PMHB and Chlorine allow you to disinfect and prevent the development of microorganisms in the swimming pool water. Since the first two are less common, it is chlorine as a disinfectant and oxidizing that is the most used for the water of the swimming pool. On the market, it is presented in liquid form, of pellets or granulate. However, the use of hydrochloric acid in a swimming pool is not formally recommended.

• Shelter, a simpler solution

To simplify the maintenance operations of a swimming pool, the swimming pool shelters prove to be the most effective solution. They actually have the great advantage of limiting the use of cleaning products. This is a profit for the owner and the environment.

At the same time, they offer more safety, protecting while water from external pollution. They also help to preserve the water temperature.

How to prepare your outdoor winter swimming pool?

In order to protect the swimming pool and also prevent limestone deposits and the proliferation of algae, The passage in winter mode is mandatory as soon as the water temperature drops below 15 ° C. This preparation also helps to facilitate restart once the maximum splendor period has returned.

Depending on the regions, it is possible to make an active wintering or a complete wintering, also called passive wintering.

• Active or partial wintering

This wintering mode is suitable for those who live in a region where, thanks to the mild climate, it is possible to leave the swimming pool open.

The development of algae decreases below 8 ° C. It is therefore not necessary to carry out significant chemical treatments and the filtration time can be regulated according to the external temperature.

• Passive or complete wintering

This is the solution in the regions in which frosts are important. In this case, it is essential to perform complete cleaning of the pelvis. The swimming pool must be covered by opaque coverage, in order to limit the photosynthesis that promotes the multiplication of algae.

The water level must drop 10 cm below the drain nozzles, while all the inputs of the water must be closed.

It is only in spring, when the water exceeds 15 ° C, that the swimming pool can be reused. However, to allow disinfectants to exploit a cumulative effect, water treatment must start at least a month before the start of the season.