How to build a cabin and what tools used?

There are a thousand and one ways to build a hut. You can make one using PVC, boxes or wooden pipes. However, in this article, we will focus in particular on the construction of a wooden hut.

Preparation of materials

You will need:

• Rafters of dimensions 75 x 110 mm
• Solids of 50 x 200 mm
• 2 cm of plywood often
• Axes 15 cm wide 2.5 cm thick
• Galvanized screws of 7.5 cm
• Gravel
• Modeling
• Clinking for wooden coating
• Covered nails

In addition, you will need a series of tools, such as a circular saw, a level, a drill, a hammer, a carpenter square, a well, a rule and a ribbon.

Before embarking on this type of work, it is of great importance to think about your safety and therefore equip yourself well.

This is why we recommend the Engelbert Strauss website which is one of the manufacturers of fashionable fashion brands in professional clothing and protective equipment at work.

If you want real windows for your cabin, add to the list of plexiglass equipment.

The choice of the cabin's position

A minimum surface of 1.85 m for 2.45 m is required for the cabin. This construction is made for external use. However, it is possible to build one inside if that's what you want.

The construction of the base of the cabane

It is on this base that your cabin will rest.

To start, it forms a rectangle of size 1.85 x 2.45 m with the beams. Then shorten the 2 2.5 cm lateral beams so that they adapt to the 2 longer chevron.

Subsequently, he creates a rectangular frame, screwing the ends of the beams together with galvanized screws.

You will therefore have to put 2 trails inside the rectangle to stabilize everything. Posational so that they are perpendicular to widths and parallels in lengths. Then fix them using the screws.

Once done, you can put the floor. Cut the axes of 2.5 x 15 cm and use them to cover the surface of the rectangle. You can nest them or attack them, one against the other, depending on the axes you use. Screwed after the rectangular form. If necessary, you can use the circular saw to equalize the floor.

Production of managers

You will need it for frames. For this step, it is necessary to perform 4 operations:

• Create the background of the background wall: To do this, you will need beams of 2.40 me 5 others chevron of 1.15 m. Take the 2 chevron of 2.40 me 2 chevrons of 1.15 me creates a rectangle. So, put the 3 chevron of 1.15 m in the middle of this rectangle as traverse. The 5 Chevron of 1.15 m must form parallels.
• Make the wall wall: The processes are the same as those for the construction of the background of the back wall. The only difference is that it is necessary, for the development of the wall of the facade, add a 15 cm Chevron below the upper chevron. It must be overlooked in 2 of the 5 perpendicular beams.
• Build the lateral walls: Create two rectangles using 4 115 cm and 4 more beams of 100 cm. Then assemble them with galvanized screws. After, to strengthen the framework, add, at the center of each rectangle, 2 115 cm Chevrons.
• Develop windows: Put 2 beams in each side frame. Make them parallel to the ground and 25 cm from the lower chevron and 25 cm from the upper one.

Correction of the frame at the base

To start, put the lower wall perpendicular to the base, 2.5 cm from its edge. Use several screws to repair it. Then screw the frames of the lateral walls, at the base, then, on the rear wall. Finally, attack the wall of the facade at the base, then on the side walls.

Construction and fixing of the hut roof

We chose a 2 -roof.

Start by measuring the trail that connects the 2 eardrums. It must be 2.40 m.

Then cut the chevrons to create crossbowcas. Their measure should allow the tympanum to be 35 cm above the side walls once the roof is finished. Then cut another 8 beams with the cards box, so that they can assemble the upper part of the walls well and the trail. They will serve as a frame (4 beams for each side of the roof).

Once finished, it is possible to place the cross on Crossbowmen, connect the frame and fix this structure on the walls. In the end, you will have to obtain 2 isoscel triangles at the ends of this frame.

Then, cut the plywood with the same size as the frame and screwed it on the crossbar and on the favorite radius.

Finally, screw the roof on the cabin frame.

You just have to finish the walls with clay glasses, put the doors and windows of your cabin, put the tiles and customize this refuge, adding a final touch.