Energy savings to be made on Home-

Do you want to lighten the energy bill, while you enjoy the comfort of the various devices operating on electricity and gas? With good habits and some changes, it is possible to save energy at home.

Monitor the main consumption stations to save energy at home. This is the best solution to reduce the electricity and gas bill.

Heating

65% of the energy costs of a house come from electric heating. To save energy, use a powerful heating system. If yours is old, it is recommended to replace it with a more recent model.

The old heating equipment, more energy that consume energy. There are financial aid for their replacement if you cannot afford to do energy renovation work.

In addition, adopts some good daily gestures:

• The ideal comfort temperature is 16 ° C in each bedroom and 19 ° C in the stays. Note that each additional degree is worth 7% of energy expenditure.
• When you are absent and in the unarmed rooms, lower the heating and close the curtains and shutters, in order to reduce energy losses. Make the same in the non -occupied rooms.
• Turn off the heating when the part is ventilated. This will avoid the loss of energy.
• To make your device keep performance, powder and remove radiators regularly. He also calls a professional, at least once a year, for the full maintenance of the heating system.

Domestic hot water

It is possible to regulate the consumption of hot water, without depriving yourself of small everyday sweets.

To do this:

• Set the hot water tank so that the water temperature does not exceed 60 ° C.
• Isolate the pipes of the balloon and domestic hot water.
• Promote thermostatic taps to limit water loss as much as possible. Otherwise, equips the taps of your home with a thermostatic mixer. With this equipment, you can reduce the consumption of hot water up to 30 %.
• For the ceiling, install a flow regulator or a pressure limiter.
• It is recommended to take a daily shower instead of a bathroom. It is much cheaper, with a 70 -liter water consumption, compared to 200 liters of hot water for a bathroom.

Electric devices and lighting

The golden rule to reduce the energy consumption of electrical devices means that it stops on standby. Leaving them in standby, The electricity bill will increase by 11%.

So when you don't use them, disconnect them. Bring a connected item or a multide to turn off your box, TV or any other electrical device, with ease.

As for lighting, LED bulbs are very cheap in terms of energy.

Home appliances

Appliances (dishwasher, washing machine, freezer, refrigerator, cooking equipment, etc.) largely facilitate daily activities.

However, they are very consumed by energy. We will have to look at them closely if you don't want to pay an astronomical sum at the end of the month.

• Save energy on the refrigerator and the freezer

These devices work 24 hours a day. It is important to choose a more recent model, to have an energy index A, A+or AA ++, which is less consumer of energy than the others.

The position of the refrigerator and freezer can also influence energy consumption. Therefore, avoid putting them next to microwave, oven or cooking dishes. Keep space between the wall and your refrigerator. This will allow the air to circulate well. This advice is valid for the rest of your devices.

Finally, clean them every month to prolong the duration of life.

• Dishwasher and washing machine, good habits to be adopted

First of all, it is important to emphasize that putting the dishes in the dishwasher is less consumer of energy than washing it by hand. You just have to use the device in Eco mode to consume less energy. In other words, you should wash at low temperature. The ideal temperature is 30 ° C. It is the same for the washing machine.

In addition, if your dishes occupies a dishwasher floor, let the car run in half charge.

• Estater: how to reduce drying time?

A shorter drying time means «reduction in energy consumption». Before putting the laundry in the dryer, squeezing it. In addition, you prefer an evacuation model, instead of choosing a condensate machine.

These simple everyday gestures must be combined with energy saving works to obtain an optimal result.

Energy renovations to save energy

These works improve the energy performance of your home. They offer you a better insulation of your home and therefore strengthen your thermal comfort, in summer and winter.

The air quality in your home will improve and you will be protected from humidity problems. You will also protect noise pollution from road traffic or neighbors. Finally, your real estate assets will be evaluated if you plan to sell your home later.

• Some suggestions for successful energy renovation work

You have decided to undertake energy renovation at home, however, you don't know where to start? Here's how to be successful.

• The definition of operations to be provided in the energy renovation work

Registration vigorously your home can mean several things, depending on the geographical position of the house and its specificities. Here is a non -exhaustive list of the elements that can be included in the energy renovation work:

• Roof insulation
• Insulation from the inside
• Renewal of the facade coating
• Replacement of the window
• Implementation of ventilation
• The installation of shutters or shutters
• The installation of a new production of hot water, a new heating, etc.

To discover exactly the improvements that should be made, rIt is not worth an energy audit made by a renewal professional. This specialist will inspect the heat loss areas with a thermal camera. It will also analyze your consumption habits.

At the end of the investigation, it will provide you with a work list, with an evaluation of the profits of each operation. You have after defining your priorities to improve the energy performance of your accommodation.

• The choice of professionals

After determining the start of work, it is time to choose the professionals who will do them. To benefit from state financial aid, as well as quality services, choose Rge Craftsmen (recognized guarantee of the environment): electrician, platform for plaster, hydraulic heating, etc. They also prefer suppliers with the HQE and NF Habitat NF certification.

This demonstrates their competence in terms of employment of the energy renewal. Finally, do not forget to compare the services offered and the citations before making a decision.

• Choose the right equipment and materials for renewal

The NF certifications attest that the product has been the subject of demanding checks before its sale. There is also the «EC» marking certifying the compliance of the product to the requirements of European regulations.

Before launching the site, if you plan to undertake heavy work, eliminate the damage insurance. It is mandatory. This insurance will cover the work in case of complaints.

• Financial aid for energy renovation work

There are several:

• The help of the anah
• Citing or tax credit for the energy transition
• Eco zero rate loan
• Subsidies in conditions granted by local authorities.